GuidesDirect

Direct

Send files straight from your PC to the PC of someone you know, like a messaging app for files. Both of you need Pako.

On this page

How it works

  • Files go from one Pako to the other, encrypted. Nothing is uploaded and stored anywhere in between.
  • Both Pakos must be open at the same time (in the tray counts). Files can't wait for someone who is offline.
  • Your contacts and your history stay on your PC.
  • Nothing goes through a Sookera server. To find each other, Pakos use a public address directory, and when the two PCs can't reach each other straight, a public relay. Both are run by the makers of the connection library Pako uses. The relay only passes on encrypted data.
  • Direct starts the first time you open the Direct page (it says "Direct is starting…" for a moment), and with Pako from then on. Until then, Pako makes no Direct connection at all. If you used Direct in an earlier Pako, it starts with Pako as before.
  • Once it runs, your Pako connects to a relay and lists its Pako ID in the directory, so others can find it, also before you have contacts: someone you gave your ID to can ask to connect. Your internet address isn't listed there. Pako may also ask your router to open a port, so two PCs can connect straight.
  • Your contacts can tell when your Pako is open: they see you as online, and when they last saw you.

Your Pako ID and your name

Every Pako has its own Pako ID, a long code. It's at the bottom of the contact list in Direct (or in the middle of the page before you have contacts). Copy copies it: send it to the people you want to connect with.

Your name (just above it) is what your contacts see. They can still give you their own name for you.

Add someone

  1. Ask them for their Pako ID, or send them yours.
  2. Click Add (or Add contact), paste their ID under Their Pako ID, type a Name (what you call them) and click Add contact.
  3. Pako reaches them. The first time, they're asked to accept. While they're asked, they show "Waiting for them to accept". If they don't answer, the line says "No answer yet. Pako asks again later."

If they decline, their line says "They declined. You can ask again after 7 days." For 7 days their Pako turns you away without asking them; after that, Connect asks again.

You only do this once. After that, you connect by yourselves whenever both Pakos are open.

The first time: Accept and the safety code

When someone adds you, Pako asks: "Rado wants to connect" (for example). It shows a Safety code. The person who added you sees the same code above your conversation.

  • If you know them, check once that you both see the same code (by voice or chat). A different code means it isn't them.
  • The name is the one they chose: Pako can't check it. If you already have a contact with that name, Pako warns you that this is a different Pako.
  • Accept adds them to your contacts. Decline turns them away. Closing the question with its × (its tooltip says Decline) or Esc declines too.

For 7 days, Pako turns away someone you declined or removed without asking you. After that, if they reach you again, you're asked like the first time.

Your contacts

The contact list shows each person with a dot on their picture:

  • Grey: offline. Under the name: when you last saw them.
  • Green: online, and how you're connected (see How you're connected).
  • Amber: waiting for them to accept you.

Something waiting for your answer is coral, not amber: a ! on the contact, the dot next to Waiting for you on the left, and the count on the Direct tab.

Online people come first, then those you're waiting for, then the rest, by name. When there are many contacts, Search contacts finds them by name or tag.

Pako tries to reach your contacts by itself every few minutes (not someone who declined you: only Connect asks them again). Connect (above the conversation) tries now. A contact who restarts their Pako is back online at once.

Filters and tags on the left

  • All contacts, Online, Waiting for you (files waiting for your answer) and Favourites.
  • Tags: your own groups, such as Friends, Family or Work. New tag makes one. Right-click a tag to rename or delete it (deleting a tag keeps the contacts).

Tags are only on your PC: your contacts never see them.

Rename, favourites, tags

Right-click a contact, or click the gear above the conversation, for:

  • Rename…: your own name for them. If they call themselves something else, it shows next to their name ("calls themselves …").
  • Tags…: tick their tags, or type a new one and click Add, then Save.
  • Add to favourites / Remove from favourites: favourites have a star and their own filter.
  • Can send to me without asking (see below).
  • Save their files in…: where their files go.
  • Clear history… (Pako asks first): empties your history with them on this PC. It can't be brought back.
  • Remove contact (Pako asks first): you're no longer connected, a transfer with them stops, and for 7 days Pako turns them away without asking you. Files already received stay on your PC.

Send files

  1. Pick the person on the left.
  2. Drop files or folders on the page, or click Choose files or Choose folder. They gather at the bottom and stay with that person, like a draft: another contact shows their own. Remove one with its ×, or all with Clear.
  3. Pick As they are, or Compressed ZIP to pack them into one smaller ZIP file first. Name (optional) names it.
  4. Click Send to Rado (with their name).

They're asked whether they want the files, unless you may send to them without asking. Meanwhile your conversation shows "Waiting for them to accept…". Once they accept, the files go straight across.

Files go only while you're both online: with someone offline, Send to Rado stays greyed. You can still pick the files, and send them once they're back.

Receive files

When a contact sends you files, Pako asks: "Rado wants to send you files". You see the name, how many files, the size and the first few file names.

  • Save to shows where they'll go. Change picks another folder for this time only.
  • Accept starts the transfer. Decline says no, and they're told. Closing the question (× or Esc) declines too.
  • A question takes your answer only after a short moment on screen, so a stray click or Esc can't decline it by accident. The same goes for someone who wants to connect.

The question also goes in the bell, and shows as a pop-up when Pako's window isn't in front, both with Accept and Decline (see Notifications).

Can send to me without asking

For people you trust, turn on Can send to me without asking (right-click menu, or in the details panel). Their files then come in without the question. Pako still asks when a send is big for the drive: "Asked because it's big for the drive".

Where received files go

By default, a contact's files go to a folder named after them inside your download folder, like "From Rado". Change it with Save their files in… (right-click), or Change… next to Their files go to in the details panel.

Pako marks received files as coming from the internet, so Windows warns before starting a program you got this way. Open on a received program or script doesn't start it: Pako shows it in its folder, so you can open it there if you trust it.

Your history with someone

Pick a contact to see everything sent and received with them, newest at the bottom. Each item shows its files, size, date, how it travelled, and how it ended: Delivered, Received, Declined, Cancelled, or what went wrong (for example "The connection was lost."). Received items have Open and Folder.

While files move, their item shows how far they are, the speed and Cancel. The contact's row in the list shows it too: "Sending 37% · 12 MB/s" under their name and a thin bar along the row. The Direct tab on the left shows how many questions wait for your answer (files, and people who want to connect), or how many transfers are moving.

If the connection drops in the middle, the transfer stops. Send it again once you're connected.

Other things a send can say:

  • "Too many sends in a short time. Try again in a minute.": their Pako turned it away because many came at once.
  • "Their Pako couldn't save it." or "Their Pako couldn't save it: there isn't enough room on their drive.": the problem is on their PC. Pako never tells you their folder or how much room they have.

While files move, Pako keeps the PC awake (with Settings › Downloads › Keep the PC awake while downloading on), When done waits for them, and quitting Pako asks first (with Ask before quitting while downloading or uploading on): "Files are on their way in Direct".

The details panel

Press Ctrl+I, or click the panel button above the conversation, to see more about the person you picked:

  • Connection: Status (Online, Waiting for them or Offline), the Route or when you last saw them, and Speed now.
  • Between you: how much you Sent and Received, the number of Transfers and the Last exchange.
  • Speed with them: the Fastest and Average speeds both ways, and how much went Direct and Via relay.
  • About them: their Pako ID (with a copy button), Their name (the one they chose), Tags, Favourite, when they were Added, Can send to me without asking, and Their files go to.

How you're connected

Next to "Online", Pako says how the two PCs are connected:

  • Direct (IPv6): straight between the two PCs, over IPv6. Usually the fastest.
  • Direct: straight between the two PCs.
  • Via relay: through a relay server, when the two networks don't allow a straight connection. Still encrypted from end to end, often slower.

You don't choose this: Pako takes the best way it can.

Still stuck? Write to support@sookera.com.